SD

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM SD

Specialized Disclosure Report

 

 

MagnaChip Semiconductor Corporation

(Exact name of registrant as specified in its charter)

 

 

 

Delaware   001-34791   83-0406195

(State or other jurisdiction

of incorporation or organization)

 

(Commission

File Number)

 

(I.R.S. Employer

Identification No.)

c/o MagnaChip Semiconductor S.A.

1, Allée Scheffer, L-2520

Luxembourg, Grand Duchy of Luxembourg

(Address of principal executive offices)

Theodore S. Kim

Chief Compliance Officer, Executive Vice President, General Counsel and Secretary

c/o MagnaChip Semiconductor, Inc.

60 South Market Street, Suite 750

San Jose, CA 95113

Telephone: (408) 625-5999

Fax: (408) 625-5990

(Name and telephone number, including area code, of person to contact in connection with this report.)

 

 

Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:

 

x Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2015.

 

 

 


Section 1. Conflict Minerals Disclosure

 

Item 1.01. Conflict Minerals Disclosure and Report.

Conflict Minerals Disclosure

MagnaChip Semiconductor Corporation (including its consolidated subsidiaries, the “Company”) has conducted a good faith reasonable country of origin inquiry (“RCOI”) regarding the conflict minerals included in its products for the reporting period from January 1, 2015 to December 31, 2015. The results of the Company’s RCOI regarding the conflict minerals included in its products, as well as its additional due diligence regarding the sources of such conflict minerals, are contained in the Company’s Conflict Minerals Report, a copy of which is filed as Exhibit 1.01 to this Form SD, and is publicly available at http://www.magnachip.com/AboutUs/Policy.php. The content on, or accessible through, any web site referred to in this Form SD is not incorporated by reference into this Form SD unless expressly noted.

 

Item 1.02. Exhibit.

As specified in Section 2 of Form SD, the Company is hereby filing its Conflict Minerals Report required by Items 1.01 and 1.02 as Exhibit 1.01 to this Form SD.

Section 2. Exhibits

 

Item 2.01. Exhibits.

The following exhibit is filed as part of this Form SD.

 

Exhibit No.

  

Description

1.01    Conflict Minerals Report of MagnaChip Semiconductor Corporation for the reporting period from January 1, 2015 to December 31, 2015


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the duly authorized undersigned.

 

MAGNACHIP SEMICONDUCTOR CORPORATION    
By:  

/s/ Theodore S. Kim

      May 31, 2016
  Theodore S. Kim       (Date)
 

Chief Compliance Officer, Executive Vice

President, General Counsel and Secretary

     


EXHIBIT INDEX

 

Exhibit No.

  

Description

1.01    Conflict Minerals Report of MagnaChip Semiconductor Corporation for the reporting period from January 1, 2015 to December 31, 2015
EX-1.01

Exhibit 1.01

MagnaChip Semiconductor Corporation

Conflict Minerals Report

For the reporting period from January 1, 2015 to December 31, 2015

This Conflict Minerals Report (this “Report”) of MagnaChip Semiconductor Corporation (including its consolidated subsidiaries, the “Company”) has been prepared pursuant to Rule 13p-1 and Form SD promulgated under the Securities Exchange Act of 1934 for the reporting period from January 1, 2015 to December 31, 2015 (the “Reporting Period”).

Forward-looking statements contained in this Report are made based on known events and circumstances at the time of release, and as such, are subject in the future to unforeseen uncertainties and risks. Statements in this Report which express a belief, expectation or intention, as well as those that are not historical fact, are forward-looking statements, including statements related to the Company’s compliance efforts and expected actions identified in this Report. These forward-looking statements are subject to various risks, uncertainties and assumptions, including, among other matters, the Company’s customers’ requirements to use certain suppliers, the Company’s suppliers’ responsiveness and cooperation with the Company’s due diligence efforts, the Company’s ability to implement improvements in its conflict minerals program and the Company’s ability to identify and mitigate related risks in its supply chain. If one or more of these or other risks materialize, actual results may vary materially from those expressed.

Rule 13p-1, through Form SD, requires the disclosure of certain information if a company manufactures or contracts to manufacture products for which certain “conflict minerals” (as defined below) are necessary to the functionality or production of such products. Form SD defines “conflict minerals” as: (i)(a) columbite-tantalite (or coltan, the metal ore from which tantalum is extracted), (b) cassiterite (the metal ore from which tin is extracted), (c) gold and (d) wolframite (the metal ore from which tungsten is extracted), or their derivatives, which are currently limited to tantalum, tin and tungsten; or (ii) any other mineral or its derivatives determined by the U.S. Secretary of State to be financing conflict in the Democratic Republic of the Congo or an “adjoining country,” as such term is defined in Form SD (collectively, the “Covered Countries”).

The Company’s business is conducted through its Standard Products Group, which consists of the Display Solutions and Power Solutions business lines, and the Company’s Foundry Services Group.

 

    The Company’s Display Solution products include source and gate drivers and timing controllers that cover a wide range of flat panel displays used in ultra high definition (UHD), high definition, light emitting diode (LED), 3D and organic light emitting diodes televisions and displays, notebooks and mobile communications and entertainment devices.

 

    The Company’s Power Solutions products include metal oxide semiconductor field effect transistors, insulated gate bipolar mode transistors, power modules, AC-DC converters, DC-DC converters, LED drivers, switching regulators and linear regulators for a range of devices, including televisions, smartphones, mobile phones, desktop PCs, notebooks, tablet PCs, other consumer electronics and industrial applications such as power suppliers, LED lighting, motor control and home appliances.

 

    The Company’s Foundry Services Group provide specialty analog and mixed-signal foundry services to fabless semiconductor companies and Integrated Device Manufacturer semiconductor companies that serve consumer, computing, communication, industrial, automotive and Internet of Things applications.

The Company’s operations may at times manufacture, or contract to manufacture, products, including the products listed above, for which conflict minerals are necessary to the functionality or production of those products (collectively, the “products”).

As required by Form SD, the Company has conducted a good faith reasonable country of origin inquiry (“RCOI”) regarding the conflict minerals included in such products during the Reporting Period, which the Company refers to as the “Subject Minerals,” to determine whether any such Subject Minerals originated in the


Covered Countries and/or whether any of the Subject Minerals were from recycled or scrap sources. Where applicable, the Company has conducted additional due diligence regarding the sources of the Subject Minerals. The results of the Company’s RCOI regarding the Subject Minerals, as well as the Company’s additional due diligence regarding the sources of such Subject Minerals, are contained in this Report, which is publicly available at http://www.magnachip.com/AboutUs/Policy.php. The content on, or accessible through, any web site referred to in this Report is not incorporated by reference into this Report unless expressly noted.

1. RCOI and Due Diligence Process.

The Company has conducted a good faith RCOI regarding the Subject Minerals. This good faith RCOI was reasonably designed to determine whether any of the Subject Minerals originated in the Covered Countries and whether any of the Subject Minerals may be from recycled or scrap sources, in accordance with Form SD and related guidance provided by the Securities and Exchange Commission (the “SEC”). The Company also exercised due diligence on the source of the Subject Minerals. The Company’s due diligence measures have been designed to follow the framework in the Organization for Economic Co-operation and Development Due Diligence Guidance for Responsible Supply Chain of Minerals from Conflict-Affected and High Risk Areas: Second Edition, including the related supplements on gold, tin, tantalum and tungsten (the “OECD Guidelines”).

RCOI

The Company’s global supply chain is complex. In the course of its business operations, the Company may purchase materials and components containing conflict minerals. These materials and components may, in turn, be included in the Company’s products or products manufactured by the Company. Because the Company does not purchase conflict minerals directly from mines, smelters or refiners, there are many third parties in the supply chain between the Company and the original sources of conflict minerals. As a result, the Company relies on its suppliers and outsourcing manufacturers to provide information regarding the origin of any conflict minerals that are included in its products. In accordance with the OECD Guidelines and related guidance provided by the SEC, the Company worked with its suppliers and outsourcing manufacturers to identify, where possible, the smelters and countries of origin of the Subject Minerals.

During the Reporting Period, the Company worked to identify its Tier 1 suppliers and outsourcing manufacturers that it believed could potentially provide materials or components containing Subject Minerals (collectively, the “Covered Suppliers”) as part of its RCOI. The Company focused on its suppliers providing materials or components for products that the Company identified as containing Subject Minerals and all of its outsourcing manufacturers. During the Reporting Period, the Company asked the Covered Suppliers to complete and return the Conflict Minerals Reporting Template (“CMRT”) that was developed by the Conflict-Free Sourcing Initiative (the “CFSI”). The CFSI was founded by the Electronics Industry Citizenship Coalition (EICC) and the Global e-Sustainability Initiative (GeSI) and has grown into a multi-industry initiative addressing conflict mineral issues in the supply chain. The CMRT is a widely-used standard form to collect information through the supply chain, including the names of smelters and refiners of conflict minerals. The CFSI’s Conflict-Free Smelter Program (the “CFSP”) sponsors independent third-party audits of smelters and refiners of conflict minerals which determine the country of origin of minerals processed through those smelters and refiners.

Using a risk-based approach, the Company evaluated responses from the Covered Suppliers for plausibility, consistency, and gaps both in terms of which materials or components were stated to contain or not contain Subject Minerals, as well as the origin of those Subject Minerals.

The Company obtained representations from substantially all of its Covered Suppliers, including completed CMRTs indicating the facilities at which the Subject Minerals were processed. Based on the information obtained pursuant to the RCOI process described above, however, the Company does not have sufficient information with respect to the Reporting Period to determine with specificity the country of origin of the Subject Minerals contained in the products. The Company’s RCOI procedures are an evolving process. See “Additional Due Diligence and Risk Mitigation” below for additional detail.


Due Diligence

The Company’s due diligence process is designed to follow the OECD Guidelines. Due diligence measures undertaken by the Company during the Reporting Period included the following:

Establish Strong Company Management Systems

Internal Team to Support Supply Chain Due Diligence.

The Company has an internal team, consisting of members from its supply management and legal departments, to manage conflict minerals engagement with its suppliers and outsourcing manufacturers. This team is charged with overseeing and driving conflict minerals compliance. This team also works with the Company’s other employees to provide training and guidance, receive and track responses and facilitate communication between departments with respect to compliance with the SEC’s reporting requirements regarding conflict minerals. In 2015, members of the internal team participated in a trade seminar with respect to conflict minerals due diligence held by Korea Electronics Association.

Internal Policy Developed to Establish Expectations of Suppliers.

The Company has adopted and published a position statement establishing the expectations of its suppliers and outsourcing manufacturers to responsibly source products on a conflict-free basis. The position statement can be found on the Company’s website at http://www.magnachip.com/AboutUs/Policy.php. The Company’s position statement will be periodically reviewed and updated as needed. The Company’s internal conflict minerals team also continually evaluates its supply agreements and purchasing procedures to determine whether additional contractual or other means of implementing the Company’s policy should be adopted as described below under “Additional Due Diligence and Risk Mitigation.”

Identify and Assess Risks in the Supply Chain

The Company continues to assess its supply chain risks and work with its suppliers and outsourcing manufacturers in developing greater supply chain transparency.

Design and Implement a Strategy to Respond to Identified Risks

The Company is committed to maintaining high standards of corporate responsibility through its compliance with Form SD. As required by Form SD, the Company is reporting the findings of its RCOI and additional due diligence measures through the preparation of this Report. The Company’s internal team that manages conflict minerals engagement with the Company’s suppliers and outsourcing manufacturers also works to address any significant due diligence findings as they arise. For example, as described below, when the Company became aware that certain of its outsourcing manufacturers used smelters that are not members of the CSFP (in this Report, we refer to CSFP-compliant smelters as “Members”), its internal team requested that those outsourcing manufacturers eliminate the non-Member smelters from the Company’s supply chain or have the non-Member smelters complete the steps required to become Members, in either case by May 15, 2015. Those Covered Suppliers have since reported back to the Company that they have eliminated the non-Member smelters from the Company’s supply chain and that they will monitor the non-Member smelters’ progress towards completion of a CFSP audit and certification as Members.

Carry Out Independent Third-Party Audit of Smelter’s / Refiner’s Due Diligence Practices

Where possible, the Company has relied on third party assurances and certifications. For example, the Company accepts as reliable any smelter that is a member of the CFSP.

Report Annually on Supply Chain Due Diligence

This Report is publicly available at http://www.magnachip.com/AboutUs/Policy.php and meets the OECD recommendation to report annually on supply chain due diligence.


2. Due Diligence Results.

Based solely on the information obtained pursuant to the RCOI and due diligence process described above, including review of CMRTs completed by the Covered Suppliers in 2015:

 

    28 of the 29 Covered Suppliers reported that they solely used Members for the Company’s products.

 

    One Covered Supplier reported that it used smelters that are designated as “Active” by the CSFP. Smelters and refiners designated as Active by the CSFP have committed to undergo, but have not completed, a CFSP audit. According to information provided on the CFSI’s website, (i) smelters and refiners are identified as Active in the CFSP once they submit signed Agreement for the Exchange of Confidential Information and Auditee Agreement contracts, which is the first step of the audit process; (ii) smelters and refiners on the Active list are at various stages of the audit cycle, and the time it takes a smelter or refiner to complete an audit cycle varies, with the average time ranging from four to six months; (iii) if an Active smelter or refiner is deemed by the CFSP to be delaying an audit, corrective action completion, or re-audit for more than 90 days, that smelter or refiner will be removed from the Active list; and (iv) a smelter or refiner that is unresponsive for 45 days will be removed from the Active list.

When the Company became aware that certain of its Covered Suppliers used smelters that were not Members (including smelters that were listed as Active with the CFSP, but had not completed the CFSP audit process), the Company’s internal team requested that those Covered Suppliers eliminate the non-Member smelters from the Company’s supply chain or have the non-Member smelters (including those designated as Active by the CFSP) complete the steps required to become Members, in either case by May 15, 2015. Those Covered Suppliers have since reported back to the Company that they have eliminated the non-Member (and non-Active) smelters from the Company’s supply chain and that they will monitor the Active smelters’ progress towards completion of a CFSP audit and certification as Members.

Based on the information obtained pursuant to the RCOI and due diligence process described above, the Company does not have sufficient information, with respect to the Reporting Period, to determine the known facility/smelter or country of origin of the Subject Minerals because certain of the Covered Suppliers were unable to identify with specificity the smelters that were part of the supply chain for the Subject Minerals contained in the products. For example, at least one Covered Supplier reported its sourcing results on a company-wide basis (and provided the Company with a list of all smelters that it uses for all of its customers, rather than solely smelters that were used for the Subject Minerals in the products), rather than on a Company product-specific basis and, accordingly, the Company was unable to determine the facility/smelter and/or country of origin for the Subject Minerals contained in the products. Furthermore, in May 2015, three Covered Suppliers reported that the minerals used for the Company’s products were derived from the mixing of different mineral inputs, some of which were processed by Members and some by non-Member smelters.

Any Covered Supplier’s failure to identify a specific facility/smelter and/or country of origin with respect to the Company’s products at any point in its supply chain will drive an equivalent response for the Company and, therefore, the Company is unable to report a complete list of facilities/smelters and/or countries of origin for the Subject Minerals at this time. The Company has, however, included in this Report a list of facilities that may have been used to process the Subject Minerals in the Company’s products as reported by the Covered Suppliers in their completed CMRTs, as noted in “Facilities Used to Process Subject Minerals and Country of Origin” below.

The Company expects to continue to implement and refine its conflict minerals program to improve its supply chain transparency by obtaining more accurate and more complete information from its suppliers and outsourcing manufacturers. See “Additional Due Diligence and Risk Mitigation” below for additional detail.

3. Additional Due Diligence and Risk Mitigation.

The Company expects to take the following steps, among others, to improve its RCOI process and due diligence measures:


Additional Terms and Conditions / Supplier Code of Conduct

Within the Company’s supplier relationships, the Company seeks to manage its sourcing processes ethically, and to hold the Company, its suppliers, and its outsourcing manufacturers to high standards of behavior. This means that the Company is committed to working with its suppliers and outsourcing manufacturers to encourage responsible practices throughout the supply network. The Company is working to strengthen its commitment to the responsible sourcing of conflict minerals, including by using the Company’s purchasing power and relationships to influence its suppliers and outsourcing manufacturers, and evaluating the use of specific terms and conditions in certain supply agreements and purchase orders. For example, the Company includes in its purchase order form a request that the supplier declare that all products supplied to the Company do not contain Subject Minerals that originate from the Covered Countries and that the supplier does not use smelters that have not been validated to be conflict free. The Company has also required certifications from its suppliers and outsourcing manufacturers that they will adhere to the Company’s conflict minerals policy and assist in its reporting requirements. The Company expects to continue to refine, develop and implement specific terms, conditions and expectations with its suppliers and outsourcing manufacturers that require, among other matters, that no materials or components supplied or manufactured on behalf of the Company contain any conflict minerals that directly or indirectly finance any armed group that has been identified as a perpetrator of human rights abuses.

Continuous Improvement of Supply Chain Due Diligence

The Company expects to continue to improve its supply chain due diligence efforts. Such measures may include, but are not limited to:

 

    assessing the presence of conflict minerals in its supply chain;

 

    clearly communicating expectations with regard to transparency of supplier sourcing of conflict minerals;

 

    increasing the detail and transparency of responses received in the RCOI and due diligence process, including by requesting that suppliers provide CMRTs twice a year;

 

    continuing to compare RCOI and due diligence results to information collected via independent conflict free smelter validation programs such as the CSFP; and

 

    contacting suppliers and outsourcing manufacturers regarding smelters identified as a result of the RCOI and due diligence process and request their participation in obtaining a “conflict free” designation from an industry program such as the CSFP.

4. Facilities Used to Process Subject Minerals and Country of Origin.

Based on the information obtained pursuant to the RCOI and due diligence process described above, the Company does not have sufficient information, with respect to the Reporting Period, to determine the known facility/smelter or country of origin of the Subject Minerals, or whether the Subject Minerals in its products are from recycled or scrap sources, for the reasons described above under “Due Diligence Results.” Based on the information provided by the Covered Suppliers in their completed CMRTs however, the Company believes that facilities that may have been used to process the Subject Minerals in the Company’s products include the following smelters and refiners.

 

Subject Mineral

  

Smelter or Refiner Name

  

Country Location of

Smelter or Refiner

Gold    Aida Chemical Industries Co., Ltd.    Japan
Gold    Allgemeine Gold-und Silberscheideanstalt A.G.    Germany
Gold    AngloGold Ashanti Córrego do Sítio Mineração    Brazil
Gold    Argor-Heraeus S.A.    Switzerland
Gold    Asahi Pretec Corp.    Japan


Subject Mineral

  

Smelter or Refiner Name

  

Country Location of

Smelter or Refiner

Gold    Asahi Refining Canada Ltd.    Canada
Gold    Asahi Refining USA Inc.    United States
Gold    Asaka Riken Co., Ltd.    Japan
Gold    Aurubis AG    Germany
Gold    Bangko Sentral ng Pilipinas (Central Bank of the Philippines)    Philippines
Gold    Boliden AB    Sweden
Gold    C. Hafner GmbH + Co. KG    Germany
Gold    CCR Refinery - Glencore Canada Corporation    Canada
Gold    Chimet S.p.A.    Italy
Gold    Dowa    Japan
Gold    Eco-System Recycling Co., Ltd.    Japan
Gold    Elemetal Refining, LLC    United States
Gold    Heimerle + Meule GmbH    Germany
Gold    Heraeus Ltd. Hong Kong    China
Gold    Heraeus Precious Metals GmbH & Co. KG    Germany
Gold    Ishifuku Metal Industry Co., Ltd.    Japan
Gold    Istanbul Gold Refinery    Turkey
Gold    Jiangxi Copper Co., Ltd.    China
Gold    JX Nippon Mining & Metals Co., Ltd.    Japan
Gold    Kennecott Utah Copper LLC    United States
Gold    Kojima Chemicals Co., Ltd.    Japan
Gold    LS-NIKKO Copper Inc.    Republic of Korea
Gold    Materion    United States
Gold    Matsuda Sangyo Co., Ltd.    Japan
Gold    Metalor Technologies (Hong Kong) Ltd.    China
Gold    Metalor Technologies (Singapore) Pte., Ltd.    Singapore
Gold    Metalor Technologies S.A.    Switzerland
Gold    Metalor USA Refining Corporation    United States
Gold    Metalúrgica Met-Mex Peñoles S.A. De C.V.    Mexico
Gold    Mitsubishi Materials Corporation    Japan
Gold    Mitsui Mining and Smelting Co., Ltd.    Japan
Gold    Nadir Metal Rafineri San. Ve Tic. A.Ş.    Turkey
Gold    Nihon Material Co., Ltd.    Japan
Gold    Ohura Precious Metal Industry Co., Ltd.    Japan
Gold    PAMP S.A.    Switzerland
Gold    PT Aneka Tambang (Persero) Tbk    Indonesia
Gold    PX Précinox S.A.    Switzerland
Gold    Rand Refinery (Pty) Ltd.    South Africa
Gold    Republic Metals Corporation    United States
Gold    Royal Canadian Mint    Canada
Gold    SEMPSA Joyería Platería S.A.    Spain
Gold    Shandong Zhaojin Gold & Silver Refinery Co., Ltd.    China
Gold    SOE Shyolkovsky Factory of Secondary Precious Metals    Russian Federation
Gold    Solar Applied Materials Technology Corp.    Taiwan
Gold    Sumitomo Metal Mining Co., Ltd.    Japan


Subject Mineral

  

Smelter or Refiner Name

  

Country Location of

Smelter or Refiner

Gold

  

Tanaka Kikinzoku Kogyo K.K.

  

Japan

Gold

  

The Refinery of Shandong Gold Mining Co., Ltd.

  

China

Gold

  

Tokuriki Honten Co., Ltd.

  

Japan

Gold

  

Umicore Brasil Ltda.

  

Brazil

Gold

  

Umicore Precious Metals Thailand

  

Thailand

Gold

  

Umicore S.A. Business Unit Precious Metals Refining

  

Belgium

Gold

  

United Precious Metal Refining, Inc.

  

United States

Gold

  

Valcambi S.A.

  

Switzerland

Gold

  

Western Australian Mint trading as The Perth Mint

  

Australia

Gold

  

Yamamoto Precious Metal Co., Ltd.

  

Japan

Gold

  

Yokohama Metal Co., Ltd.

  

Japan

Gold

  

Zhongyuan Gold Smelter of Zhongjin Gold Corporation

  

China

Gold

  

Zijin Mining Group Co., Ltd. Gold Refinery

  

China

Tantalum

  

Changsha South Tantalum Niobium Co., Ltd.

  

China

Tantalum

  

Conghua Tantalum and Niobium Smeltry

  

China

Tantalum

  

F&X Electro-Materials Ltd.

  

China

Tantalum

  

Global Advanced Metals Boyertown

  

United States

Tantalum

  

H.C. Starck Co., Ltd.

  

Thailand

Tantalum

  

H.C. Starck GmbH Goslar

  

Germany

Tantalum

  

H.C. Starck GmbH Laufenburg

  

Germany

Tantalum

  

H.C. Starck Hermsdorf GmbH

  

Germany

Tantalum

  

H.C. Starck Inc.

  

United States

Tantalum

  

H.C. Starck Ltd.

  

Japan

Tantalum

  

H.C. Starck Smelting GmbH & Co. KG

  

Germany

Tantalum

  

Jiujiang Tanbre Co., Ltd.

  

China

Tantalum

  

Mitsui Mining & Smelting

  

Japan

Tantalum

  

Ningxia Orient Tantalum Industry Co., Ltd.

  

China

Tantalum

  

Plansee SE Liezen

  

Austria

Tantalum

  

Plansee SE Reutte

  

Austria

Tantalum

  

Solikamsk Magnesium Works OAO

  

Russian Federation

Tantalum

  

Taki Chemicals

  

Japan

Tantalum

  

Ulba Metallurgical Plant JSC

  

Kazakhstan

Tantalum

  

Zhuzhou Cemented Carbide

  

China

Tin

  

Alpha

  

United States

Tin

  

China Tin Group Co., Ltd.

  

China

Tin

  

Cooperativa Metalurgica de Rondônia Ltda.

  

Brazil

Tin

  

CV Ayi Jaya

  

Indonesia

Tin

  

CV Gita Pesona

  

Indonesia

Tin

  

CV Serumpun Sebalai

  

Indonesia

Tin

  

CV United Smelting

  

Indonesia

Tin

  

CV Venus Inti Perkasa

  

Indonesia

Tin    Dowa    Japan
Tin    Elmet S.L.U.    Spain
Tin    EM Vinto    Bolivia
Tin    Fenix Metals    Poland


Subject Mineral

  

Smelter or Refiner Name

  

Country Location of

Smelter or Refiner

Tin    Gejiu Non-Ferrous Metal Processing Co., Ltd.    China
Tin    Jiangxi Ketai Advanced Material Co., Ltd.    China
Tin    Magnu’s Minerais Metais e Ligas Ltda.    Brazil
Tin    Malaysia Smelting Corporation (MSC)    Malaysia
Tin    Melt Metais e Ligas S.A.    Brazil
Tin    Metallic Resources, Inc.    United States
Tin    Metallo-Chimique N.V.    Belgium
Tin    Mineração Taboca S.A.    Brazil
Tin    Minsur    Peru
Tin    Mitsubishi Materials Corporation    Japan
Tin    O.M. Manufacturing (Thailand) Co., Ltd.    Thailand
Tin    O.M. Manufacturing Philippines, Inc.    Philippines
Tin    Operaciones Metalurgical S.A.    Bolivia
Tin    PT Aries Kencana Sejahtera    Indonesia
Tin    PT Artha Cipta Langgeng    Indonesia
Tin    PT ATD Makmur Mandiri Jaya    Indonesia
Tin    PT Babel Inti Perkasa    Indonesia
Tin    PT Bangka Prima Tin    Indonesia
Tin    PT Bangka Tin Industry    Indonesia
Tin    PT Belitung Industri Sejahtera    Indonesia
Tin    PT BilliTin Makmur Lestari    Indonesia
Tin    PT Bukit Timah    Indonesia
Tin    PT Cipta Persada Mulia    Indonesia
Tin    PT DS Jaya Abadi    Indonesia
Tin    PT Eunindo Usaha Mandiri    Indonesia
Tin    PT Inti Stania Prima    Indonesia
Tin    PT Justindo    Indonesia
Tin    PT Mitra Stania Prima    Indonesia
Tin    PT Panca Mega Persada    Indonesia
Tin    PT Prima Timah Utama    Indonesia
Tin    PT Refined Bangka Tin    Indonesia
Tin    PT Sariwiguna Binasentosa    Indonesia
Tin    PT Stanindo Inti Perkasa    Indonesia
Tin    PT Timah (Persero) Tbk Kundur    Indonesia
Tin    PT Timah (Persero) Tbk Mentok    Indonesia
Tin    PT Tinindo Inter Nusa    Indonesia
Tin    PT Wahana Perkit Jaya    Indonesia
Tin    Resind Indústria e Comércio Ltda.    Brazil
Tin    Rui Da Hung    Taiwan
Tin    Soft Metais Ltda.    Brazil
Tin    Thaisarco    Thailand
Tin    VQB Mineral and Trading Group JSC    Vietnam
Tin    White Solder Metalurgia e Mineração Ltda.    Brazil
Tin    Yunnan Tin Company Limited    China
Tungsten    A.L.M.T. TUNGSTEN Corp.    Japan


Subject Mineral

  

Smelter or Refiner Name

  

Country Location of

Smelter or Refiner

Tungsten    Chenzhou Diamond Tungsten Products Co., Ltd.    China
Tungsten    Chongyi Zhangyuan Tungsten Co., Ltd.    China
Tungsten    Ganzhou Huaxing Tungsten Products Co., Ltd.    China
Tungsten    Ganzhou Seadragon W & Mo Co., Ltd.    China
Tungsten    Global Tungsten & Powders Corp.    United States
Tungsten    Guangdong Xianglu Tungsten Co., Ltd.    China
Tungsten    H.C. Starck GmbH    Germany
Tungsten    Hunan Chunchang Nonferrous Metals Co., Ltd.    China
Tungsten    Japan New Metals Co., Ltd.    Japan
Tungsten    Kennametal Huntsville    United States
Tungsten    Tejing (Vietnam) Tungsten Co., Ltd.    Vietnam
Tungsten    Wolfram Bergbau und Hütten AG    Austria
Tungsten    Xiamen Tungsten (H.C.) Co., Ltd.    China
Tungsten    Xiamen Tungsten Co., Ltd.    China